2. "STUBBY" ECLIPSE TOOL HOLDER
To obtain maximum value of the tool bit it is necessary for the bit to rest on a flat surface.This tool holders which are made from high quality steel, completely fulfill this need.Designed to be used on Engligh type Lathes with the flat tool rests or 4 way turret tool posts for square tool bits. A clamp is provided so that the tool bit may not move when being used, Hence reducing a chance of breakage of the tool bit. Supplied with Wrench but without tool bit.
| No. | Shape | Capacity to hold Square tool bit. (inches) |
Dimensions (mm) |
||
| L |
W
|
H | |||
|
523 522 521 543 542 541 533 532 531 553 552 551
|
Straight Left hand Right hand Straight Left hand Right hand Straight Left hand Right hand Straight Left hand Right hand
|
3/16"-1/4" 3/16"-1/4" 3/16"-1/4" 1/4"-5/16" 1/4"-5/16" 1/4"-5/16" 5/16"-3/8" 5/16"-3/8" 5/16"-3/8" 3/8"-1/2" 3/8"-1/2" 3/8"-1/2"
|
130 130 130 140 140 140 152 152 152 185 185 185
|
12 12 12 14 14 14 16 16 16 19 19 19
|
18 18 18 22 22 22 24 24 24 30 30 30
|
Unit of pack - 1 Pc. in each box
